Walrus Audio EB-10 Preamp/EQ/Boost, Black
5.0 (20 items)
Limited Time Sale$119.99 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 215937536 | Release Date | 2026/04/19 | List Price | $80.00 | Model Number | 215937536 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
A tone tweaks delight, the eb-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost or cut of low, mid, and high frequencies, based on where you have the toggle switches set. When the boost switch is engaged, add a 10dB MOSFET boost For some great extra punch. Use the eb-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use The onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the boost switch With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. The eb-10 offers two operating modes, “live” and “preset”. in live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the bypass switch. In preset mode, the pedal offers preset slots to store Three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the bypass switch. The pedal will Boot up in the last known operating mode and if that is preset mode, It loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.
- Works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound
- Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set
- When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch
- Used to compensate when switching between low and high output instruments
- Power requirements: 9VDC, center negative (100mA minimum)
| UPC | 810424031838 |
|---|---|
| Color | Black |
| Style | Boom microphone stand with a telescoping boom arm |
| Voltage | 9 Volts |
| Amperage | 100 Milliamps |
| Set Name | 3 |
| Brand Name | Walrus Audio |
| Model Name | EB-10 Preamp |
| Unit Count | 1.0 Count |
| Item Weight | 0.4 Kilograms |
| Manufacturer | Walrus Audio |
| Model Number | 900-1049B |
| Power Source | Electric |
| Controls Type | Knob |
| Signal Format | Analog |
| Connector Type | 1/4 inch (6.35mm) audio jack |
| Item Type Name | EB-10 Preamp/EQ/Boost, Black |
| Item Dimensions | 6 x 4 x 3 inches |
| Hardware Interface | 1/4-inch Audio |
| Included Components | Footswitch |
| Audio Output Effects | Preamp, EQ, Boost |
| Warranty Description | Limited lifetime warranty for workmanship and components after registration. |
| Manufacturer Part Number | 900-1049B |
| Global Trade Identification Number | 00810424031838 |
Bestseller ranking
Equalization
Customers who viewed this product also viewed
Magazine Loaders
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form