Red Oak Figured Tiger Flame Wood Veneer Sheet 24" x 24" with Paper Backer 1/40"

Red Oak Figured Tiger Flame wood veneer 24" x 24" with paper backer 2' x 2' x 1/40". Photos are representative of the actual product you will receive and sheets will vary in color, grain and general appearance since this is a natural product. Figuring will show better when finished. Many photos are side views to show figured grain and may be of other sized sheets. Ships rolled in long narrow box with application instructions. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Visit My Store: JSO Wood Products Other sizes, backers and unbacked veneer may be available. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used with veneer that is applied correctly.

• Model: Wood veneer Tiger flame 1/40" thickness thin F/C, Wood Type: Oak
• Brand: Figured Red Oak wood veneer with paper backer
• Veneer Type: Paper Backed
• Veneer Cut: Plain Sliced