Ketosis Meter Professional Ketone Breath Analyzer for Keto Testing - High-Accuracy Rechargeable Breath Ketone Meter Home Ketone Breath Tester with 10 Mouthpieces - Monitor Fat Burning & Ketosis Levels

Essential Tips for Accurate Ketone Readings | Ketone Breath TesterBefore first use: Clear residual air from the meter (leftover from production and shipping). If testing another person immediately after your own test, repeat this clearing process too.How to clear: Turn on the ketone breath analyzer, wait for the 30-second countdown to complete, then turn it off. Repeat 1-2 times (no blowing needed) before your first official test.Testing procedure: Once "START" appears, blow continuously for 5-6 seconds right away. The meter will automatically analyze your breath, and results will be displayed for 10 seconds.Pre-Measurement CautionsThis ketosis breath meter is equipped with a high-sensitivity sensor—avoid factors that affect accuracy! Do NOT brush teeth, smoke, drink, or eat for 30 minutes before testing. For the most reliable ketosis tracking, test under the same conditions every time: test first thing in the morning, on an empty stomach, before consuming any food or drinks.Breath Acetone Concentration Reading Guide (PPM)✔ 0 ~ 2 PPM: Not in ketosis (or on the verge of entering ketosis)✔ 3 ~ 4 PPM: Very early stage of ketosis✔ 5 ~ 10 PPM: Light ketosis – Body fat is burning at a moderate pace✔ 11 ~ 39 PPM: Optimum ketosis – Stable fat-burning zone; body uses fat as the primary energy source (ideal for fat loss)✔ 40 ~ 59 PPM: Caution! Approaching excessive ketosis. Adjust your diet/lifestyle to lower levels below 40 PPM✔ 60 ~ 99 PPM: Danger! Severe ketosis (ketoacidosis). Seek medical attention immediately.

• The breath ketosis meter needs to be exhausted before your first use; to do this, turn on the Keto Breath Meter, wait for the 30-second countdown to complete, then turn it off, and repeat this procedure 1-2 times (without blowing) before proceeding to your first test, and during testing, please blow continuously for 5-6 seconds immediately once "START" appears, after which the Ketone Breath Analyzer will start analyzing your breath and the results will be visible for 10 seconds.
• This ketone breath meter is an easy-to-use, self-monitoring device designed for individuals following a keto lifestyle; it saves you from painful finger pricks, and since the device can be used repeatedly by replacing the mouthpiece, it helps you save money on constant test strip purchases while being more convenient—you only need to breathe into the monitor for 5 seconds to get results.
• The breath ketone analyzer detects breath acetone levels from 0 to 99 PPM and follows 6-level guidance: 0.0-2 ppm (No ketosis), 3-4 ppm (Early Stage Ketosis), 5-10 ppm (Light Ketosis), 11-39 ppm (Stable Fat Burning Zone), 40-59 ppm (Caution-High Ketosis), 60-99 ppm (Ketoacidosis); tracking breath acetone is a more reliable measure of what your body uses for fuel because acetone in breath is a direct byproduct of fat burning, and 80% of burned fat leaves the body through the lungs.
• The breath ketone analyzer detects breath acetone levels from 0 to 99 PPM and follows 6-level guidance: 0.0-2 ppm (No ketosis), 3-4 ppm (Early Stage Ketosis), 5-10 ppm (Light Ketosis), 11-39 ppm (Stable Fat Burning Zone), 40-59 ppm (Caution-High Ketosis), 60-99 ppm (Ketoacidosis); tracking breath acetone is a more reliable measure of what your body uses for fuel because acetone in breath is a direct byproduct of fat burning, and 80% of burned fat leaves the body through the lungs.
• Important Note: Ketone readings may temporarily remain high after consuming carb-rich foods due to a time lag in metabolizing ketones. This delay varies for each individual and depends on factors like the duration of your ketogenic lifestyle.